Ampli SE IA202D

THÔNG SỐ KỸ THUẬT

  • Type: Class-D, SMPS
  • Power Output:
    • 2 x 250W @ 8 Ω
    • 2 x 125W @ 16 Ω
  • Minimum Load Impedance: 8 Ω
  • Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced
  • SNR (At rated power): 95 dB
  • Crosstalk: 64 dB
  • DSP: 48 kHz, 24-bit DSP processor, processing latency: 1.1 ms
  • Signal Processing: Speaker presets, Delay, High Shelf, High-Pass, Parametric Equalizer, Limiter, Phase Invert, Mute, Input Gain
  • Maximum Input Level: +20 dBu
  • Signal Connectors: “XLR 3-pin male line-level inputs/link outputs, 
Phoenix Contact MSTB 3-pin inpults/link outputs”
  • Speaker Connectors: Neutrik Speakon® NL4 outputs, Phoenix Contact MSTB 4-pin outputs
  • Power Efficiency: 76%
  • Power Consumption (Idle, Full Power): 29 W / 600 W
  • Power Requirements: 100 – 240 VAC
  • Dimensions (W x H x D): 483 x 66 x 256 mm / 1.5 HU
  • Weight: 4.7 kg (netto)

  • Hướng dẫn mua hàng (khách ở xa) xem.
  • 1 đổi 1 trong 7 ngày với sản phẩm lỗi.
  • Chế độ bảo hành tận nơi.

16.970.000

Còn hàng 
 Trả góp 0% 

GỌI LẤY GIÁ TỐT

Hỗ trợ kỹ thuật
093 5555 746
Hotline
0907 7770 58
Tư vấn
090 7777 058

HOT - THU CŨ ĐỔI MỚI - NHẬN BÁO GIÁ NGAY

I-Line offers two 2-channel class-D power amplifiers with switching mode power supply.

IA 202D delivers 2x 250 Watts at 8 Ohms.

The amplifier is equipped with a digital encoder with push button for DSP preset selection, delay settings, EQ adjustments and more.

Sensor-controlled fan and optimized front-to-back air flow, together with very low idle power consumption, ensure low noise levels for quiet environments at all times.

A combination of XLR, Speakon and Phoenix connectors for in- and output ensures maximum flexibility during the installation process.

SE AUDIOTECHNIK SE IA202D Feature

Connectivity

IA 202D power amplifier is equipped with 3 most widely used analog input and output connections in professional audio. 2 channel XLR inputs with link outputs together with Phoenix MSTB 3-pin inputs will cover most of the input needs. Outputs are equipped with 3x Neutrik Speakon® connectors in parallel with 4-pin Phoenix MSTB connectors for maximum flexibility.

DSP

24bit/48kHz DSP processor provides all I-line speakers with correct and precise filter, EQ and limiter settings. As always – good sounding and well protected speaker systems are the ultimate aim of the SE Audiotechnik engineering team. Built-in speaker presets, EQ control, delay and other features allow for an easy, cost-effective and quick system setup and tuning


 Bạn đang thắc mắc hoặc chưa kiếm được sản phẩm mong muốn? Hãy

ĐẶT CÂU HỎI

16970000

Ampli SE IA202D

Ampli SE IA202D

Trong kho

Gọi điện 0907777058
Chat ngay